Hoe u een plafondventilator installeert in een kamer zonder bestaande bedrading of armatuur

Installing a ceiling fan in a room with no existing wiring or fixture may seem like a daunting task, but with the right tools, materials, and step-by-step instructions, you can successfully tackle this DIY project. In this comprehensive guide, we’ll walk you through the process of installing a ceiling fan from scratch, ensuring proper safety measures and code compliance along the way.

Benodigde gereedschappen en materialen

Before starting your ceiling fan installation, gather the following tools and materials:

LadderCeiling fan with mounting bracket
SchroevendraaierElektrische kast
Draadstripper14-2 or 12-2 NM electrical cable
SpanningstesterCable clamps
Gipsplaten zaagDrywall anchors (if needed)
Drill with bitsLight bulbs (if applicable)

Step 1: Choose the Right Location

Select a suitable location for your ceiling fan, considering factors such as room size, ceiling height, and desired airflow. Ensure the chosen spot is at least 7 feet above the floor and has sufficient clearance from walls and other objects. Use a stud finder to locate ceiling joists for secure mounting.

Step 2: Cut the Ceiling Opening

Using a stud finder, mark the location of the ceiling joists where you plan to install the fan. Cut a hole in the drywall slightly larger than the electrical box using a drywall saw. Be cautious not to damage any existing wiring or plumbing.

Step 3: Install the Electrical Box

Secure a fan-rated electrical box to the ceiling joist using the provided screws. If the joist is not accessible, use a brace bar to span between two joists and attach the electrical box to the brace. Ensure the box is level and flush with the drywall.

Step 4: Run the Electrical Cable

Drill a hole in the top of the electrical box for the cable. Feed the 14-2 or 12-2 NM electrical cable from the power source to the box, leaving about 6 inches of slack. Secure the cable to the box with a cable clamp.

Safety Note: Always turn off the power at the main circuit breaker before working with electrical wiring to avoid shock hazards.

Step 5: Make the Wiring Connections

Strip about 6 inches of the outer sheathing from the electrical cable and about 3/4 inch of insulation from the individual wires. Connect the black (hot) wire to the black wire on the fan, the white (neutral) wire to the white wire on the fan, and the green (ground) wire to the green wire or ground screw on the mounting bracket. Use wire nuts to secure the connections.

Step 6: Mount the Ceiling Fan

Attach the mounting bracket to the electrical box using the provided screws. Carefully lift the fan assembly and hang it on the hook of the mounting bracket. Make the wiring connections between the fan and the house wires as described in the previous step. Tuck the wires into the electrical box.

Step 7: Secure the Canopy and Blades

Slide the canopy up to the mounting bracket and secure it with the screws provided. Attach the fan blades to the motor housing according to the manufacturer’s instructions, ensuring they are tightened securely.

Step 8: Install the Light Kit (Optional)

If your ceiling fan includes a light kit, follow the manufacturer’s instructions to connect the wiring and attach the light fixture to the fan. Install the appropriate light bulbs and shades.

Step 9: Test and Enjoy Your New Ceiling Fan

Restore power to the circuit and use the pull chains or wall switch to test your newly installed ceiling fan. Ensure the fan rotates smoothly and the light kit functions properly, if applicable.

Troubleshooting Tip: If the fan wobbles, check that the blades are securely attached and balanced. Adjust as needed.


By following these step-by-step instructions and adhering to safety guidelines, you can successfully install a ceiling fan in a room with no existing wiring or fixture. This DIY project not only enhances your room’s comfort and style but also allows you to customize your lighting options.

Consider upgrading your old fixture with an energy-efficient LED-plafondlamp of een dimmable LED downlight for adjustable illumination. For added safety, opt for a fire-rated LED downlight. If you prefer focused lighting, an anti-glare LED spotlight is an excellent choice.

Remember, if you encounter any issues or feel unsure about the electrical work, consult a licensed electrician to ensure the job is done safely and up to code. With your new ceiling fan in place, sit back, relax, and enjoy the improved ambiance and circulation in your room.