If you’re a DIY enthusiast or a professional electrician, installing track lighting is an excellent way to add more light and style to your space. One of the most popular brands when it comes to track lighting is Lithonia, known for its high-quality products that come in various styles, finishes, and sizes.
In this guide, we’ll walk you through how to install Lithonia track lighting step by step. We’ll cover everything from preparing the necessary tools and materials to connecting the wires and mounting the track onto the ceiling.
Before You Begin
Before getting started with installation, make sure you have all the necessary tools and materials on hand:
Tools:
- Measuring tape
- Pencil
- Level
- Screwdriver
- Wire stripper or cutter
- Electrical tester
Materials:
- Lithonia track lighting kit (track heads, power feed connector, end-feed connector)
- Appropriate bulbs for your kit
- Anchors (if needed)
Once you have everything ready, move on with these steps:
Step 1: Turn Off Power at Circuit Breaker
It’s important always to turn off power at circuit breaker before starting any electrical work. Locate the circuit breaker that controls electricity flow in your room where you will install Lithonia track lighting. Switch it off completely so that there’s no current running through any wiring during installation work.
Step 2: Plan Your Layout
Before jumping straight into marking holes for installation on your walls or ceiling surface directly; take some time first clearly plan exactly where each fixture should be placed so that they are evenly spaced apart as well as oriented correctly around objects or furniture pieces already present within a given area.
Use measuring tape and pencil sketch out an outline of how many tracks are required based upon measurements taken beforehand. Make note of which direction tracks will face based upon how you want lights to shine down from them in terms of angles involved.
Step 3: Install the Power Feed Connector
With power turned off, it’s time to install the power feed connector. A power feed connector is a junction box that connects your Lithonia track lighting kit to your electrical circuit. This is where electricity will flow through and distribute evenly across the track heads.
Mount the power feed connector onto ceiling or wall surface desired using appropriate screws (if included) provided within kit packaging by following instructions provided with product unit itself. Ensure it stays level for proper performance by checking with a leveling tool as you move forward.
Step 4: Connect End-Feed Connector
The next step is connecting your end-feed connector to the other side of your Lithonia light track system which has channels running throughout its length at regular intervals. End-feed connectors are designed specifically for this purpose, providing seamless connectivity between tracks while also allowing for additional customization options when used appropriately.
First, strip about .5 inches (or more if necessary) off each wire end using wire stripper/cutter tool making sure not to nip strands accidentally while exposing enough copper area at tip so wires can easily be inserted into groove opening on connector body itself without any resistance felt during insertion process whatsoever.
Next up, match corresponding colors together on each separate piece unit and then tighten screw securely around these connections after making certain they’re properly seated inside grooves provided within metallic structure itself—testing again until everything feels snugly in place without any jiggling or loose spots seen anywhere around electrical components.
Step 5: Mount Track Heads Onto Track System
After all connection points have been secured tightly in place and tested thoroughly with an electrical tester device; now comes time mounting individual track heads onto rail mechanism previously installed beforehand using either screws/bolts according specific mounting directions given per individual package contained right inside their boxes themselves!
Be sure follow instructions closely since any missed step could lead improper installation resulting damage both light fixture unit and surrounding area nearby. Take care when handling these delicate electrical components by wearing gloves if necessary during this process as well.
Step 6: Attach Track System to Ceiling or Wall Surface
Once track heads have been installed onto tracks themselves, now it’s time attach to your chosen surface (ceiling or wall). Use appropriate anchors if needed followed up with screws/bolts per manufacturer’s recommendations until final alignment achieved—using level tool again here too just double check everything remains in line properly all around installation site being worked upon currently!
Be sure not over-tighten screws/bolts following instructions provided within supplied materials. This will lead secure attachment without causing undue stress on either component itself or nearby areas affected by vibrations running through each piece involved.
Step 7: Install Bulbs and Turn on Power
The final step is installing your bulbs into each Lithonia track lighting head while also restoring power at circuit breaker again—checking beforehand ensure that current flowing correctly across entire system before doing so! Make certain everything works fine after power has been switched back on at home main panel switch using electrical tester device one more time confirming proper functionality seen everywhere along entire network pathway constructed today.
Congratulations! You successfully installed your new Lithonia track lighting system; enjoy its performance moving forward as you wish for years come knowing that latest addition adds value easy solution illuminating space beautifully whenever need arises from simple work-related activity relaxation-oriented leisure hours downtime too available everyone loved ones alike thanks latest LED technology advancements made possible by companies like Lithonia itself.
Conclusion
Lithonia track lighting is a great option for adding both style and extra illumination to any room in your home or office. Whether you’re looking for accent lighting or task lighting, Lithonia offers a wide range of products that come in various finishes, sizes, and styles.
By following these seven easy steps, you can install your Lithonia track lighting system in no time. Remember to always turn off power at circuit breaker before starting any electrical work and follow instructions provided by manufacturer closely.
We hope this guide has been helpful to you in installing Lithonia track lighting. If you have any questions or comments, feel free to leave them below!
FAQs
Q: Do I need special tools or equipment to install Lithonia track lighting?
A: You will need some basic tools such as a screwdriver, wire stripper, pliers, and a voltage tester. You may also require additional equipment like mounting hardware and electrical tape depending on the type of installation you’re doing.
Q: Can I install Lithonia track lighting myself or do I need to hire an electrician?
A: If you have experience working with electrical wiring, installing Lithonia track lighting can be a DIY project. However, if you’re unsure about any aspect of the installation or don’t feel comfortable working with electricity in general, it’s best to hire a qualified electrician.
Q: How do I connect multiple fixtures along one track system?
A: First, determine how many fixtures you want on each circuit by calculating the total wattage of all the lights together with 80% load capacity guide from NEC (National Electrical Code). Next, use jumper wires and connectors provided by Lithonia Lighting to link all the fixtures together along one continuous track segment. Make sure that each fixture is securely fastened onto the track before turning on power again.
Note that these FAQs are not exhaustive and there might be other questions people could have when installing Lithonia track lighting.
