Gimbal COB LED downlights are a great way to light slanted ceilings because you can change the direction of the light and make the design more flexible. However, installing these fixtures on sloped ceilings requires careful consideration and attention to detail. In this article, we’ll discuss how to install gimbal COB LED downlights on sloped ceilings.
Step 1: Determine the placement and spacing.
Before installing gimbal COB LED downlights, it’s important to figure out where they will go and how far apart they will be. Think about the lighting’s purpose and the size of the room when deciding how many fixtures you need and where to put them. As a general rule, you should space the fixtures at a distance that is equal to or less than the height of the ceiling.
Step 2: Mark the Locations
Once you know where the fixtures will go and how far apart they will be, use a pencil to mark the spots where the fixtures will go. Use a level to ensure that the markings are straight and even.
Step 3: Cut the Holes
Using a hole saw, cut holes in the ceiling at the marked locations. Make sure that the holes are the correct size for the fixtures and that they are spaced evenly.
Step 4: Install the housing.
Put the gimbal COB LED downlights’ housings into the holes in the ceiling. Make sure that the housing is level and flush with the ceiling.
Step 5: Connect the Wiring
Connect the wiring of the gimbal COB LED downlights to the electrical wiring in the ceiling. Follow the manufacturer’s instructions for wiring the fixtures, and make sure that the wiring is properly grounded.
Step 6: Attach the Trim
Attach the trim of the gimbal COB LED downlights to the housing. Make sure that the trim is securely attached and flush with the ceiling.
Step 7: Adjust the Direction
Adjust the direction of the gimbal COB LED downlights to the angle you want once the fixtures are in place. This lets you change the direction of the light and bring attention to certain features or parts of the room.
Conclusion
Installing gimbal COB LED downlights in sloped ceilings can make the space feel better and give you more control over where the light comes from. You can install these fixtures safely and quickly by figuring out where they should go and how far apart they should be, marking the spots, cutting the holes, putting in the housing, connecting the wiring, attaching the trim, and adjusting the direction.
FAQs
Can gimbal COB LED downlights be used on other types of ceilings?
Yes, gimbal COB LED downlights can be used in other types of ceilings, but the installation process may vary.
Do I need to hire an electrician to install gimbal COB LED downlights?
Even though you can install gimbal COB LED downlights on your own, you should hire a professional electrician to make sure they are installed correctly and safely.
Can I use dimmer switches with gimbal COB LED downlights?
Yes, gimbal COB LED downlights can be used with dimmer switches, but it depends on the specific fixture and the dimming control system used.
What is the advantage of using gimbal COB LED downlights on sloped ceilings?
Gimbal COB LED downlights can be turned in different directions and made in different ways, so they can be used to light sloped ceilings.
Are gimbal COB LED downlights more expensive than traditional lighting fixtures?
Gimbal COB LED downlights may cost more than traditional light fixtures, but they save money in the long run because they use less energy and last longer.
